Introduction
The AquaSEAL™ SW-2600 & 3300 are
liquid coaters used to coat printed
substrate with a protective sealant. The
unit will accommodate medium, large,
and grand format substrate.
The substrate is threaded through the
sealant applicator mechanism, under a
drying assembly, and onto a take-up
roller. During the operation, the liquid
coater applies sealant onto the printed
graphics (base substrate) and then
cures and dries it before winding the
substrate onto a take-up roller.
The results can be controlled by a
combination of speed settings, unwind
tension and temperature control. A
trained operator is required to adjust
these settings in combination for best
results.
Manual Overview
This manual is intended for the user of
the AquaSEAL™ SW-2600 or 3300.
Read this manual carefully before
starting the machine.
This manual contains information for
correct installation, operation and
maintenance of the machine.
It also contains important instructions on
how to prevent accidents, personal
injury and/or serious damage prior to or
during operation of the machine.
Familiarize yourself with the functioning
and operation of this machine and
strictly observe the directions given.
If you have any questions, please do not
hesitate to contact us. The address and
phone numbers are listed in Section 8 -
Technical Support.
Topics Covered in This Manual
Section 1. Safety Information:
An explanation of equipment, environmental and
operating safety issues.
Section 2. Features & Control Panel:
AquaSEAL SW-2600 and SW-3300 features
explanations and Control Panel layout and usage.
Section 3. Specifications:
Lists the general specifications, requirements, and
capacities.
Section 4. Installation and Set-up:
Outlines procedures for unpacking and setting up
the coater.
Section 5. Operating Procedures:
Outlines
start-up and job processing steps.
Section 6. Maintenance:
Outlines
job process cleaning, 24-hour cleaning, and regular
maintenance care and cleaning.
Section 7. Glossary:
Lists and defines terms used in this manual.
Section 8. Technical Support:
Contact information for Aqua SEAL
TM
SW-2600 and
SW-3300 technical issues and questions.
In this manual you will find four (4) levels of flagged warnings or notes:
DANGER!
INDICATES AN IMMINENTLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS
INJURY.
WARNING!
INDICATES A POTENTIALLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS
INJURY.
CAUTION!
INDICATES A POTENTIALLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, COULD RESULT IN MINOR OR MODERATE
INJURY.
NOTE:
The Note message is used to give operational information and useful tips
.
II
Summary of Contents for AquaSEAL SW-2600
Page 4: ......
Page 43: ...Notes 31 33 ...
