Sea Tel DAC-2202, Installation And Operation Manual

Page: 98 / 115

Maintenance & Troubleshooting DAC-2202 Antenna Control Unit
8-12
14
The
Az Limit 4
field displays the numeric value currently stored in RAM.
15 The Az Limit 5 field displays the numeric value currently stored in RAM.
16 The Az Limit 6 field displays the numeric value currently stored in RAM.
17 The EL Limit 12 field displays the numeric value currently stored in RAM.
18 The EL Limit 34 field displays the numeric value currently stored in RAM.
19 The EL Limit 56 field displays the numeric value currently stored in RAM.
20
Click the
SUBMIT
button to transfer all currently displayed parameters to the operating
software variables table (working memory). NOTE: The submit button will not store the values
to memory, an ACU reset or Power cycle will revert to the old settings saved in NVRAM.
21 Click the RELOAD button to refresh the screen to display the current ACU parameter values
22 Click the SAVE button to store all currently displayed parameters to memory (NVRAM).
8.12. Status Page
Number Description
1
These fields present the current antenna status as reported by the ACU.
2
These fields present the current DishScan and Satellite Reference mode status as reported by
the ACU and PCU.
3
The
Control
field buttons allow the user to Toggle the antennas’ current tracking condition or
to clear any reported errors as reported in fields 16 and 17.
4 The Latitude field displays the numeric and hemispheric value currently stored in RAM.
5 The Longitude field displays the numeric and hemispheric value currently stored in RAM.
6 The SATELLITE field(s) present longitudinal and hemispheric position of the currently stored
(or last targeted) satellite.
7 The Local HDG field displays the numeric value currently stored in RAM. (Gyro compass input
to ACU)
8 The Threshold field displays the numeric value currently reported by the ACU.
9 The Mdm Lck/Ext AGC field displays the numeric value currently reported by the ACU.