Sea Tel DAC-2202, Installation And Operation Manual

Page: 96 / 115

Maintenance & Troubleshooting DAC-2202 Antenna Control Unit
8-10
8.10. DAC Parameters Page 1
Number Description
To change a parameter value mouse click inside the entry field and type in the desired value or
select from the drop down list and click on the SUBMIT button. If the parameter value
change(s) causes desirable operation click on the SAVE button to store into Flash.
1 The Elevation Trim field displays the numeric value currently set in RAM.
2 The Elevation Step Size field displays the numeric value currently set in RAM.
3 The AUTO Threshold field displays the numeric value currently set in RAM.
4
The
Search Increment
field displays the numeric value currently set in RAM.
5
The Search Limit field displays the numeric value currently set in RAM.
6 The Search delay field displays the numeric value currently set in RAM.
7 The System Type field displays the sum of the numeric values currently set in RAM. This List
box below the displayed parameter displays the decoded System Type parameter currently
stored in Flash. The applicable ACU system options are highlighted in blue, when the System
Type value is entered.
Changes to this list box itself is possible, Select the desired options and the correlating
parameter value for System Type will be displayed in the entry field.
8 The Tracking Display dropdown menu list displays the value currently set in RAM.
9 The Azimuth Trim field displays the numeric value currently set in RAM.
10 The Azimuth Step Size field displays the numeric value currently set in RAM.
11 The Sweep Increment field displays the numeric value currently set in RAM.
12 The Step Integral field displays the numeric value currently set in RAM.
13
The
Polang Type
field displays the numeric value currently set in RAM.
14 The Polang Offset 24V field displays the numeric value currently set in RAM.
15 The Polang Scale 24V field displays the numeric value currently set in RAM.