Sea Tel DAC-2202, Installation And Operation Manual

Page: 93 / 115

DAC-2202 Antenna Control Unit Maintenance & Troubleshooting
8-7
8.8. System Information
The System Information page, also known as the HOME page, displays current antenna software and model
configurations.
Number Description
1
Click to select to the
Port Settings
Page. This page displays the TCP connection and baud
rate settings for the Comm If Module.
2 Click to select to the DAC Parameters 1 Page. This page displays the current ACU
configuration parameter values stored in the ACU.
3 Click to select to the DAC Parameters 2 Page. This page displays the current Satellite
Tracking parameter values stored in the ACU. This page also contains the currently defined
blockage zones (Az Limits 1-6).
4 Click to select to the Favorites Page. This page displays an editable list of 5 “Preset”
satellites and their respective tracking parameters.
5
Click to select to the
Status
page. This page displays current system status, including
Tracking condition, Antenna Position, Vessel Location / Orientation, and decoded error
conditions.
6 The ACU Model field displays the software version currently installed in the ACU M/B.
7 Click to refresh the field values described below, while on any other page, the Home link
redirects you to this page.
8
The
PCU Model
field displays the Antenna model configuration and the software version
currently installed in the PCU.
9 The Comm Interface field displays the software version currently installed onto the
Comm IF Module.
10 The Tracking Receiver field displays the software version currently installed onto the ACU’s
internal tracking receiver.
The Serial Number display fields are NOT being used in this software revision.