Section 08 STEERING SYSTEM
Subsection 02 (OFF-POWER ASSISTED STEERING SYSTEM (O.P.A.S.))
To do this:
– Remove the spring
no. 13
.
– Remove the spring pin
no. 14
from piston and
pivot rod
no. 4
.
smr05-039-003
– Remove the piston.
– Check pivot rod
no. 4
for cracks or scratches.
Replace it, if necessary.
– Install a new piston with a new spring pin.
Before assembly, it will be necessary to change
the split rings
no. 15
and
no. 16
inside cylinder
cap
no. 11
. Do the following:
– To remove the upper split ring
no. 15
, lift one
end over the cap tab.
smr05-039-004
– Turn the split ring to remove it from cap.
smr05-039-005
– Repeat the same procedure for the lower split
ring
no. 16
.
– Install new split rings into cylinder cap. The
opening of each split ring must be aligned with
the appropriate lock inside cap.
smr05-039-006
LOWER SPLIT RING
smr2005-039
245
www.SeaDooManuals.net
