SCIEX ExionLC 100, Hardware User'S Manual

Page: 51 / 219

Figure 3-10 System Adjustment Screen
Description Label Item
Shows the Rack Setting screen. The plate type for each
rack ID can be specified and rack position adjustment
can be performed. Refer to
Adjust the Rack Position .
Rack Setting 1
Shows the Injection Port Teaching screen. The injection
port position is adjusted. This procedure should be
performed by an FSE. Injection Port Teaching 2
Shows the Key Lock screen. The Login Password Input
screen is shown at the time of operation to prohibit
screen operation unless the login password is input. Key Lock 3
Shows the Network Setting screen. The network settings
can be configured.
Configure Network Settings .
Network Setting 4
Shows the Date Setting screen. The date and time
settings can be configured. Refer to
Set the Date and
Time .
Date Setting 5
Shows the Safety Lock screen. This screen allows setting
of the safety lock that stops the arm of the autosampler
while the door is open. Refer to
Set a Safety Lock .
Safety Lock 6
ExionLC
™
100 System Hardware User Guide
51 / 219 RUO-IDV-05-1839-C
Configuration