Scientific SMO1000E, User Manual

Page: 167 / 185

Scientific
SMO1000E 167/185
To Save and Recall Test Mask
Users can save the current test mask to the internal Flash memory or external USB
flash device. The file format of the test mask file is “*.RGU”.
Save Test Mask to Internal Memory
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the
Next Page softkey to go to the second page of the UTILITY
function menu.
3. Press the Pass/Fail softkey to enter the PASS/FAIL function menu.
4. Press the
Enable Test softkey to select On to enable the pass/ fail test.
5. Press the
Source
softkey to select the desired channel.
6. Press the
Mask Setting softkey to enter the MASK function menu.
7. Press the
X Mask or Y Mask softkey; and then turn the Universal Knob to
select the desired value.
8. Press the Location softkey to select Internal
9. Press the
Save softkey to save the mask to internal memory.
10. A few second later, it will pop-out the message “
Store Data Success! ”
Note: the internal memory can only save one test mask; save a new test mask
will cover the old one.
Recall Test Mask from Internal Memory
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the
Next Page
softkey to go to the second page of the UTILITY
function menu.
3. Press the Pass/Fail softkey to enter the PASS/FAIL function menu.
4. Press the
Enable Test softkey to select On to enable the pass/ fail test.
5. Press the
Mask Setting softkey to enter the MASK function menu.
6. Press the
Location softkey to select Internal.
7. Press the
Load softkey to recall the saved interval memory.
8. A few second later, it will pop-out the message “
Read Data Success! ” and
the saved mask will be displayed on the screen.