Assembly
There is an alternative connection option via two M3 connections
in the bottom for unlocking and turbo. In this case, the side
connections must be sealed off with the two M5 locking screws
(already fitted when delivered). If this connection version is
chosen, the direct connections in the bottom without a hose must
each be sealed with an O-ring. In the customer-specific attachment
flange, recessed O-ring seats are required for this.
The axial-sealing O-ring seat must be manufactured to the
following dimension: Ø 6
+ 0.1
x 0.8
+ 0.05
. The accessory pack for the
NSA mini 100 contains the Ø 3 x 1.5 (see "Assembly drawing", item
19
) O-rings for sealing the bottom hose-free direct
connections.
When the turbo connection is used, the spring-actuated locking
procedure is actively supported with air pressure. If the turbo
connection is not used, the relevant side of the piston must be
able to ventilate.
19
09.00 | NSR mini 100 / PKL mini 100 | Assembly and Operating Manual | en |
0489056
