SCHUNK SRM 10, Assembly And Operating Manual

Page: 56 / 136

Mounting and adjustments, size 10 - 14
56 12.00 | SRM | Assembly and Operating Manual | en | 1346850
5. Observe movement of the load in front of and in the end
position.
✓
The movement brakes smoothly, no springing back or
swiveling of the load is visible. The product is correctly
adjusted.
✓
OR: Springing back or swiveling of the load visible in the end
position. Increase absorber stroke, } 6.3.2.3 [ / 56] .
✓
OR: Springing back or swiveling of the load visible in front of
the end position, then slow rotary movement to the end
position. Turn off exhaust air throttle valve "C"
incrementally, if necessary reduce the absorber
stroke,
}
6.3.2.3 [
/
56] .
6. Swivel repeatedly to test the setting, readjust if necessary.
6.3.2.3 Adjust absorber stroke
NOTE
The absorber stroke has been pre-set in the factory and can be
adjusted in order to achieve the optimal swiveling time.
Designation SRM
10-H 12-H 14-H 14-S
Projection "H" - factory settings [mm] 8.5 8 11.5 29.5
Designation SRM
10-H 12-H 14-H
Projection "H" - factory settings [mm] 8.5 8 11.5