SCHUNK SRM 10, Assembly And Operating Manual

Page: 36 / 136

Mounting and adjustments, size 10 - 14
36 12.00 | SRM | Assembly and Operating Manual | en | 1346850
2. Fasten attachment with cylindrical pins and fastening screws to
the pinion. IMPORTANT! Insert the cylindrical pins by hand.
Do not hammer the pinion.
3. In the main air connections "A" and "B", screw in throttle
valves and connect compressed air lines, } 6.2.2 [ / 41] .
✓
IMPORTANT! Property damage caused by missing
components!
Mount fixed throttle and throttle valves from
the accessory pack in the compressed air lines for air
connections "a" and "b".
✓
Use O-rings from the accessory pack.
4. Variant with center position (M): Screw exhaust air throttle
valve into the main air connection "C" and connect
compressed air line,
}
6.2.2 [
/
41] .
5. Check that all of the throttle valves are closed.
6. Screw in locking screws in open and not required air
connections where appropriate.
7. Variant with fluid feed-through: remove locking screws from
required connections. Screw in suitable connections and connect
hoses,
}
6.2.3 [
/
44] .
8. Adjust end positions, } 6.3.1 [ / 48] .
9. Mount the sensor, } 6.4 [ / 60] .
10. Adjust swiveling speed, } 6.3.2.1 [
/
54] .
11. Adjust shock absorber stroke,
}
6.3.2.3 [
/
56] .