Mounting and adjustments, size 10 - 14
Set end positions - variant with external stop -X
1. Loosen set-screw (B3).
2. Apply pressurized air to air connection "A".
3. Open the exhaust air throttle valve at the air connection "B"
approx. two turns until the pinion (1) moves to the end
position "E1".
4. Turn the adjusting sleeve (B2) and set the desired end position.
IMPORTANT! Observe permissible adjustment range.
5. Check end position.
✓
To do this, ventilate air connection "A" and pressurize it
again, if necessary adjust end position.
6. Tighten set-screw (B3).
✓
Tightening torque: SRM 10-X / 12-X: 1.2 Nm;
SRM 14-X: 3 Nm
✓
End position "E1" is set.
7. Adjust other end position analogously.
8. Swivel repeatedly to test the setting, adjust if necessary.
51
12.00 | SRM | Assembly and Operating Manual | en | 1346850
Summary of Contents for SRM 10
Page 135: ......
