Structure and description, size 10 - 14
4.2 Description
The product is a pneumatic rotary actuator for rotating and
swiveling movements.
The following designs are possible for the product:
Angle of rotation
• In the -E / -H / -S variants, the angle of rotation is 180° and can
be adjusted from +5° to -95° for each end position.
• In variant X, the angle of rotation is 90° or 180° and can be
adjusted by +/- 3° for each end position.
Center position variant (M)
With the center position variant, a third (center) position can be
approached.
Fluid feed-through (MDF) variant
With the fluid feed-through variant, gasses can be fed through
without hoses.
Variant with external stop (X)
In the variant external stop, the load is screwed directly onto a
stop lever and intercepted. The impact energy in the end position
is not dissipated via the drive pinion. Thus, higher loads are
possible.
Possible combinations of variants
The following variants can be mounted together on the product:
• Fluid feed-through (MDF)
• External stop (X)
Possible combination of variants for center position
The following variants can be mounted together on the product
with center position (variant -M):
• Fluid feed-through (MDF)
• Stops with absorber, variant -H or -E
29
12.00 | SRM | Assembly and Operating Manual | en | 1346850
Summary of Contents for SRM 10
Page 135: ......
