Maintenance
02.01|FDB 150, 300, 340, 660, 900, 1040 |en
45
22 Use a small flat head screw driver to seat the (spindle supply
fitting) rubber disk and retaining ring into the bottom of the
counterbore in the front housing assembly.
23 Slide the boot onto the air motor and align the edge of the
boot to the edge of the contact sleeve.
24 Stretch the garter spring over the boot, it will seat in the
groove on the contact sleeve.
25 Install the deburring tool to the robot or work location.
26 Connect the air hose to the spindle supply fitting and the
compliance air fitting.
27 Apply and/or unlock the spindle motor air supply.
