Technical Data
02.01|FDB 150, 300, 340, 660, 900, 1040 |en
13
Technical Data
Enviromental Limitations
Operation:
Installation position:
Mounted to robot by means of the side mounting pattern or
rear adapter flange. The flange is specific to each type of robot.
This optional flange is normally supplied by SCHUNK in a blank
for customer modification.
Mounted to a table or stand by means of the bench adapter
(the robot is carrying the workpiece).
Temperature range:
5° C – 35° C
Storage:
Temperature range:
5° C - 35° C
Conditions:
The tool should be stored in its crate and in a dry place. When not
in use, keep the unit in its crate if possible
Utilities:
The tool requires clean, dry, filtered, non-lubricated air. The
use of a coalescing filter and filter elements rated 5 micron or
better is required. The spindle must be supplied at 6.2–6.5 bar
and the radial compliance (centering) air must be supplied
from a regulated source between 1.0–4.1 bar
4
