Technical Data
02.01|FDB 150, 300, 340, 660, 900, 1040 |en
15
Technical Specifications
FDB
660
990
1040
Motor
Air Turbine
Idle Speed (RPM)
40.000
25.000
40.000
Power
660 W
@ 40,000 RPM
900 W
@ 25,000 RPM
1000 W
@ 40,000 RPM
Weight (without Adapters) approx 2.2 kg
approx 3.4 kg
approx 3.4 kg
Compensation
(Radial)
± 9 mm max. radial,
± 4.5 mm recom-
mended
± 8 mm max. radial,
± 4 mm recom-
mended
± 8 mm max. radial,
± 4 mm recom-
mended
Compliance Force
(Measured at Collet)
12.8-45.4 N @ 1.0-
4.1 bar
12.8-45.4 N @ 1.0-
4.1 bar
12.8-45.4 N @ 1.0-
4.1 bar
Burr Surface Speed
Dependent on cutter geometry and motor speed
Spindle Air Pressure
6.2 - 6.5 bar
6.9 bar max
6.2 - 6.5 bar
6.9 bar max
6.2 - 6.5 bar
6.9 bar max
Air Consumption (Idle)
5.4 l/s (11.5 CFM)
8.5 l/s (18 CFM)
19 l/s (18 CFM)
Air Consumption (Stall)
17.9 l/s (38 CFM)
40 CFM
40 CFM
Sound Pressure Level *
Less than 70 dB(A) (without cutter)
Collet Size (Standard)**
6 mm (ER-11)
Rotary Burrs ***
Commercial Units Rated 40,000 RPM or Higher
Special Tools
Open end Wrenches (1 pair supplied)
11 mm Open end
10 mm narrow (Only for use with ER11 collets)
*
All noise emission measurements were taken under no load idle conditions without
a cutting tool. Because the working environment is unknown it is impossible to pre-
dict the noise that will occur during a deburring operation. The FDB may also excite
resonant frequencies on equipment to which it is mounted creating higher sound
pressure levels than the unit by itself.
** SCHUNK can supply Burrs,
