Maintenance
02.01|FDB 150, 300, 340, 660, 900, 1040 |en
35
Maintenance
The user is encouraged to return the unit to SCHUNK for mainte-
is provided to assist the user when they
choose to maintenance the FDB in the field. For all maintenance, it
is recommended that the air supply (before the solenoid valves) be
disconnected. Drain any trapped air pressure in the lines. It is sug-
gested that the air supply be “locked out” to prevent accidental
operation of the spindle. During maintenance operations, refer to
Procedures for maintenance instructions. Service
and repair parts are identified in Serviceable Parts.
Recommended Spare Parts
For repair and spare parts please contact SCHUNK. Suggested user
replaceable, optional and spare parts are listed in the tables be-
low. All other repairs must be performed by SCHUNK:
FDB-150
1/8" Collet
3 mm Collet
Collet Nut
FDB-300/-340
Ø 3mm Collet
Ø 1/8” Collet
Ø 3/16” Collet
Ø 6mm Collet
Ø 1/4” Collet
Collet Nut, FDB 300/ FDB 340 Motor (.450 Lg. x .318 Hole)
Collet Nut, FDB 300/ FDB 340 Motor (.450 Lg. x .254 Hole)
Spindle Tubing Adapter, 3/8" to 5/16" [8 mm]
Spindle Tubing Adapter, 1/2" to 5/16" [8 mm]
8
8.1
Available spare parts
