Maintenance
02.01|FDB 150, 300, 340, 660, 900, 1040 |en
47
13 Using a 2 mm Allen wrench, loosen the 2 M4 set screws at the
bottom of the gimbal ring.
14 Using a 1.3 mm Allen wrench inserted into the side hole of the
threaded bushing, turn the bushing in toward the gimbal ring.
15 Thread M3 fasteners into the pivot pins.
16 At the front of the front housing assembly, loosen the 2 M5
set screws securing the motor pivot pins until they extend out
of the front housing about 3 mm.
17 Pull the M3 fasteners screwed into the pivot pins to extract the pins.
18 Withdraw the air motor complete as an assembly by twisting it
and pulling it backward out of the main housing.
