3 Assembly and start-up
14
SCHMIDT
®
ServoPress 605-660
– V1.1
3.6 Connecting the press
DANGER
Injuries or death caused by touching live parts
When carrying out assembly and maintenance work, you may come into
contact with parts that carry dangerous voltage during operation. Touching
live parts may cause death.
Any work on the electrical system or equipment must be carried out
only by trained electricians or by specially instructed persons under the
control and supervision of a trained electrician and in accordance with
the applicable electrical engineering rules and regulations.
All connections of the press are labeled.
Observe the enclosed circuit diagram.
Figure 8: Connections (example)
1
A10/X1 power (orange)
2
A10/X2 encoder (green)
All connections of the process data acquisition are labeled.
Observe the enclosed circuit diagram.
Figure 9: Connections (example)
1
X1 EtherCAT-P In
2
X2 EtherCAT Out
3
X3 Data
Press
Process data
acquisition
