10 Quality monitoring
SCHMIDT
®
PressControl 3000 – V1.3
48
The stroke tolerance created is displayed in the curve output with the
designation "WA"/"WR". The tolerances are numbered sequentially.
WA1
WR2
2.00
1.50
1.00
.500
0.0
F[kN]
s[mm]
9.17
18.34
27.52
36.69
Figure 10-7: Defined stroke tolerances
Select the "Curve Output" system function key.
Press the "Enter" key.
Select the "Input Monitoring Data" command.
Select the "Delete Stroke Tolerance" command. The display switches to
the curve output and a cursor appears additionally.
Move the cursor using the cursor keys to the left corner of the tolerance
to be deleted, and confirm the position by pressing the "Enter" key.
The stroke tolerance that will be deleted is always the one whose left
corner is closest to the cursor.
Managing tolerances
After you have defined the tolerances using the cursor keys, you can display
the values of every single tolerance numerically and change them, if
necessary.
Select the "Curve Output" system function key.
Press the "Enter" key.
Select the "Monitoring Data Numeric" command.
1
CtrON
CtrOFF
...
...
Servic
Stroke Tolerance
Window 5-8
Window 1-4
Monitoring Data Numerical
Figure 10-8: "Monitoring Data Numerical" menu
Deleting
stroke tolerance
