7 Press processes
SCHMIDT
®
PressControl 3000 – V1.3
28
Enter deflection
Figure 7-1: Positioning error due to deflection or compression
1 Deflection
2 Compression
After you have completely set up the press system (with tools), you can
calculate the deflection. This can be done based upon a normal press
sequence.
Select the "Curve Output" system function key.
Press a workpiece and record the force/stroke curve.
Enlarge the curve section so that the press start and press end are
visible.
2.00
1.50
1.00
.500
0.0
F[kN]
s[mm]
10.00
20.00
30.00
40.00
Figure 7-2: Calculate deflection
Calculate the deflection.
Sample calculation:
Stroke difference
∆
s = 2 mm
Force difference
∆
F = 1,7 kN
Deflection
∆
s/
∆
F =
1,176
mm/kN
Select the "Data Input" system function key.
Select the "Bend up [mm/kN]" parameter.
Enter the calculated value
F
F
1
2
2
2
∆
F
∆
s
Calculate deflection
