9 Dataset management
SCHMIDT
®
PressControl 3000 – V1.3
41
Parameter changes in the system dataset have an immediate effect only
upon the next press process but not upon the original dataset. If you wish to
retain the changes, you need to save the changed system dataset as a user
dataset. For this, a total of 20 storage locations for user datasets is
available.
9.2 Managing multiple datasets
Creating and storing datasets
In the control unit, 20 datasets can be stored in the respective memory
locations.
Define the press parameter as described in chapter "7.1 Defining the
press process".
Define the tolerance data as described in chapter "10.2 Tolerances".
Select the "Datasets" system function key.
Select the "Save File" command.
Using the "Up" / "Down" cursor keys, select one of the 20 memory
locations and confirm with "Enter".
1
CtrON
CtrOFF
...
...
Servic
10 Dataset 10
9 Dataset 9
8 Dataset 8
7 Dataset 7
6 Dataset 6
5 Dataset 5
4 Dataset 4
3 Dataset 3
2 Dataset 2
1 Dataset 1
Save File
Figure 9-2: Save dataset
Load dataset
Datasets created and saved earlier can be loaded when needed.
Select the "Datasets" system function key.
Select the "Load File" command.
Using the "Up" / "Down" cursor keys, select one of the 20 memory
locations and confirm by pressing "Enter".
