Schmidt AS 990 Operating Instructions Manual Download

Page: 55 / 180

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner

2017-02-02 55

7.19.1 Closing and opening suction nozzle

channel

7.19.1.1 Closing

the suction nozzle

channel with plug



Switch off blower



Parking the machine safely



Open clamping locks (1)



Remove suction hose (2) from suction nozzle

channel (3).



Place plug (4) in the suction nozzle channel (3).



Put the suction hose (2) back on the closed

suction nozzle channel (3) and secure the suction
hose (2) with the clamping locks (1).

Opening the suction nozzle channel:

Opening the suction nozzle channel is the reverse
procedure to that of closing it.

7.19.1.2 Closing

the suction nozzle

on the rear suction unit

The suction unit is closed by means of a shutter gate.

NOTE

Damage to the shutter gate

►

Do not use the gate unit as a ladder

(e.g., during maintenance work)

TIP

The shutter gate is sluggish when the blower
is switched on

►

Only activate the gate unit if the blower is

switched off.



Switch off blower



Parking the machine safely



Unlock the shutter gate (pull out cotter pin 1).



Push the shutter gate inwards and secure it

with a spring clip. Insert the spring clip into
the securing hole (2).

Opening the suction nozzle channel:

Opening the suction nozzle channel is the reverse
procedure to that of closing it.

Summary of Contents for AS 990





















































































































































































Search results

Summary of Contents for AS 990

Reviews:

Related manuals for AS 990

Brands by name

Popular brands

Schmidt AS 990, Operating Instructions Manual

Search results

Summary of Contents for AS 990

Reviews:

Related manuals for AS 990

Brands by name

Popular brands