Schmidt AS 990 Operating Instructions Manual Download Page 73

Page: 73 / 180

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner

2017-02-02 73

8.5.2

Putting the sweeper unit into operation

TIP

If other equipment, e.g., the suction unit or cylindrical
brushes, is already in use:



Press the button (1); the disc brush lowers into
the working position and switches on



Press the button (1) again; the disc brush rises
into the working position and switches off

TIP

Changing and deactivating the sweeper menu is only
possible if the blower output has dropped to less
than ¼ power and no menu function has been
activated with the joystick.



Button (1) is preselected or press.

Sweeper is preselected



Move the joystick (2) to the direction of (2b).

Sweeping unit is lowered and switched on.



Set the speed of the cylindrical brush with rotary

knob (3).

The rear sweeper functions are displayed with symbols
in the display



Sweeper unit off (4)



Sweeper unit on (5)

Turning off the sweeper



Move the joystick (2) to the direction of (2a).

The sweeper is raised, moved to transport position
and switched off.



Turn off the sweeper with button (1).

Only the sweeper is raised, moved to transport position
and switched off.

Summary of Contents for AS 990





















































































































































































Search results

Summary of Contents for AS 990

Reviews:

Brands by name

Popular brands

Schmidt AS 990, Operating Instructions Manual

Search results

Summary of Contents for AS 990

Reviews:

Brands by name

Popular brands