Schmidt AS 990 Operating Instructions Manual Download

Page: 108 / 180

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner

2017-02-02 108

11.3.6 Wanderhose

WARNING

Drawing in or trapping caused by vacuum

►

Stop working immediately if people enter

the danger area, and stop the machine

WARNING

Risk of damage to hearing when working with
wander hose

►

Wear ear protection.

11.3.7 Liquid pick-up unit

TIP

For optimum liquid pick-up, the recommended
sweeping speed is 10-15 km/h.



Start the vehicle engine



Start auxiliary engine

NOTE

The cold diesel engine warms up automatically
before it can be switched to full load capacity.
The engine controller automatically ensures
that this is the case.



Use the option switches to select the functions

of your choice (suction unit and spray unit).



Setting the diesel engine speed.



Use the joystick on the control panel to raise and

lower the selected units or switch them on or off



Set vehicle in motion. Driving speed must be

adapted to the respective debris levels on the
road surface.

Summary of Contents for AS 990





















































































































































































Search results

Summary of Contents for AS 990

Reviews:

Related manuals for AS 990

Brands by name

Popular brands

Schmidt AS 990, Operating Instructions Manual

Search results

Summary of Contents for AS 990

Reviews:

Related manuals for AS 990

Brands by name

Popular brands