Schmidt AS 990 Operating Instructions Manual Download

Page: 88 / 180

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner

2017-02-02 88

8.5.23 Activate the wanderhose

Switch to level 1 as described under

Menu

NOTE

If the wanderhose is switched on, all other
attachments are switched off.



Start auxiliary engine



Button (1) is preselected or press.

The wanderhose is preselected.



By turning the joystick (3), the suction power

(blower speed) can be increased or decreased.



With the joystick (3) in the ON direction,

see display (4). The joystick is to be moved
to the OFF direction to turn it off.

8.5.24 Turning on dual suction

With dual suction, the fluid is suctioned up between
the axles

Switch to level 1 as described under

Menu

For optimum suction power you must close the
suction channel in the rear suction equipment.

Activate dual suction



Start auxiliary engine



Button (1) is preselected or press.

Dual suction is preselected.



The display symbol appears (2).



Start dual suction with the joystick (3). Fluid

suction duct lowers and the blower switches on.
Observe the symbol (4) indicating the joystick
direction.



By turning the joystick (3), the suction power

(blower speed) can be increased or decreased.

Summary of Contents for AS 990





















































































































































































Search results

Summary of Contents for AS 990

Reviews:

Related manuals for AS 990

Brands by name

Popular brands

Schmidt AS 990, Operating Instructions Manual

Search results

Summary of Contents for AS 990

Reviews:

Related manuals for AS 990

Brands by name

Popular brands