manualshive.com logo in svg

Schmidt AS 990, Operating Instructions Manual

Share
Download
Schmidt AS 990 Operating Instructions Manual Download Page 85

 

 

 

Translation of Original Operating Instructions 
Airport Sweeper / Airport Stand Cleaner 

 

2017-02-02 85 

 

8.5.20  Controlling front-mounted machine 

e.g. snowplough, magnetic beam 

 

DANGER 

People can be caught between the attachment 
and the vehicle. The attachment can only be 
moved if the danger zone can be seen. 
The attachment may not be moved if there are 
people in the danger zone. 

 

 

 

NOTE 

Damage to castor wheels 

►

 Lift the snow plough before swivelling 

 

 

 

TIP 

The auxiliary engine does not need to be started 
to control the attachment. The ignition to start 
the attachment motor must be switched on. 

 

 

 

8.5.20.1 Manual 

operation 

During manual operation, the joystick is to be held 
in the functional direction of the attachment until 
the end position has been reached. 

  Start the vehicle engine and switch on the 

ignition of the attachment motor. 

  Press the button (1). The "Manual control" 

symbol is illuminated in green.  

  The attachment can be controlled 

(raised/lowered and pivoted) with the joystick (2). 

 

 

Summary of Contents for AS 990





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands