Schmidt AS 990 Operating Instructions Manual Download

Page: 100 / 180

Translation of Original Operating Instructions
Airport Sweeper / Airport Stand Cleaner

2017-02-02 100

9.6

Suction assembly limit stop

NOTE

Damage to the suction unit

►

Do not move the height limit stop into another

position.

The suction assembly limit stop has been
mounted to the correct height at the factory.
If the limit stop has to be removed or replaced,
contact Aebi Schmidt customer service.

9.7

Air suspension limit stop

NOTE

Vehicle with air suspension
Damage to the pick-up unit

►

Do not remove the height limit stop (1)

The limit stop limits the lowering of the air
suspension so that the pick-up unit is not damaged.

Summary of Contents for AS 990





















































































































































































Search results

Summary of Contents for AS 990

Reviews:

Related manuals for AS 990

Brands by name

Popular brands

Schmidt AS 990, Operating Instructions Manual

Search results

Summary of Contents for AS 990

Reviews:

Related manuals for AS 990

Brands by name

Popular brands