Commissioning
54
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
Figure39:
"XUIO configuration /
XUIO configuration"
dialog window
Important!
If errors occur during communication via the Ethernet
connection to the XCx, the correct parameterisation of the
interface in MULTIPROG must be checked.
The hardware configuration saved in the PLC project is displayed in
the dialog window. The hardware configuration is initially empty when
you first open this window for a new PLC project. In this case, the
hardware configuration must only be read once from the controller
(
Fetch configuration
button) and added to the PLC project with
OK
(
Figure40:
"XUIO configuration"
dialog window
