Commissioning
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
91
Start EC-Engineer.
Figure103:
Start EC-Engineer for
changing the variable
names..
Select the slave stack, or a slave module. Then click on the index card
<Variables>. Mark the variables that need to be renamed and click <Edit>.
Figure104:
Edit the variable
names from EC-
Engineer.
Now you can allocate your own variable name. When there is <@>
character in front of the variable, the name will also change in MULTIPROG,
without <@> the name will only be input in the comments area.
Figure105:
Insert your own
EtherCAT® variable
name.
After all the changes were carried out, save the project.
Figure106:
Save the EtherCAT®
variable names.