Commissioning
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
73
6.8.8
Installation of ProCANopen
Note
For users who have already installed ProCANopen version 2.1
and MULTIPROG 1.2 for Schleicher MicroLine and
ProNumeric/ProSycon controllers:
You only need the update version of ProCANopen.
Do not overwrite the installed version!
Install ProCANopen V3.2 in a new path on the hard disk, e.g.
\ProCANopen3.
If you are using a CANCardX you may need to update the
firmware and the options on the card. Please note the serial
number of the card and contact your local supplier.
Depending on your PC operating system, you may need to
install a number of drivers. Some new drivers are incompatible
with the older ProCANopen version 2.1. This means that
ProCANopen version 2.1 with the new V3.x drivers will not
function online with the field bus.
Configuration files configured with ProCANopen V2.1 can still
be used with ProCANopen V3.2.
To install ProCANopen, please follow the documentation supplied with
the software and the CAN card. You have to install the drivers and the
ProCANopen software in two steps.
Copy the latest EDS files for the controller type of the service CD to
the
\...\ProCANopen\EDS
directory.
If you want English as the dialog language, open the
\....\ProCANopen\EXE\VECTOR.INI
file and change the line
"language=0049" to "language=001".
