Schleicher XCA 1100, Operating Manual

Page: 45 / 156

Commissioning
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
45
6.4.2 Compiling a Project and Sending to the XCx
To compile a project, select Code / Make (

Figure29)
(alternatively click <F9> or Make button, see arrow).
Figure29:
Compile project
The progress of compiling is displayed in the message window below.
Error messages, warnings and other information are displayed here.
Click "Error", "Warning", etc., to display the message in more detail.
If errors are displayed, you can jump directly to the line of the PLC
program that caused the error by double-clicking in the error line.
Send the project to the controller via the Ethernet connection
(

Figure30):
(1) Click the Project control dialog button. Click the Send button in the
XCx control dialog that opens.
(2) Under Project , select Send again to overwrite the existing project
in the XCx.
(3) Use the Cold (cold start) button in the Resource control dialog to
start the program on the XCx. The PLC RUN LED on the
controller permanently lights up in green.
Figure30:
Transfer project to
controller