System Overview
14
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
3.2
Assembly
The controller slot on a rack of the XBT series (
Figure3) is located
between the power supply unit (left) and the expansion modules
(right). This slot order must be observed!
Figure3:
Slot of the
controller on the rack
Power
supply unit
Controller
(heat sink | CPU)
U-expansion
modules
Figure4:
Install the modules
on the rack
1.
Hook the module
with the lateral pin
into the rack from
above
2.
Press module firmly onto
contact strip
3.
Tighten
attachment
screws
Note
Further information on the complete system, rack fitting,
measurement of the required power supply units and selection of
the expansion modules can be found in the "Expansion Modules
for XCx and Promodul-U" operating manual (