Commissioning
40
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
6.3.5
Communication for programming with MULTIPROG (step 3)
A suitable network route must first be set up for communication with
an external PC for programming with MULTIPROG via the in-house
network.
The parameters are entered under
Start / Programs /Accessories
/Prompt
(
Example:
route add 192.168.212.0 mask 255.255.255.0
10.208.3.212 –p
(-p for permanent), apply with <Enter>.
Figure19:
Set up network route for
programming with
MULTIPROG
Use the PING command to perform a test to see whether the
communication connection is working (the XCx 1100 must be
connected and started):
ping 192.168.212.2
<Enter>
Display for correct connection:
Response from 192.168.212.2: Bytes=32 Time<1ms TTL=63
Response from 192.168.212.2: Bytes=32 Time<1ms TTL=63
Response from 192.168.212.2: Bytes=32 Time<1ms TTL=63
Response from 192.168.212.2: Bytes=32 Time=1ms TTL=63
Ping statistics for 192.168.99.2:
Packages: Sent = 4, Received = 4, Lost = 0
(0% Loss),
Approx. time in milliseconds:
Minimum = 0ms, Maximum = 1ms, Mean = 0ms
