Commissioning
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
51
6.6
Access to I/O Level
6.6.1
The Buttons in The XUIO Configuration Dialog Window
Figure36:
"XUIO configuration"
dialog window
Add card; add bus coupler
Not relevant for XCA Control.
Add module
Add a new module. A selection list appears with all modules for the
XCA Control. The properties of the module (slot number, option,
module addresses) can now be specified in another dialog window.
Click
OK
to confirm and add the module. It is sorted in the hardware
configuration according to the slot number selected. A new module
can then only be added when a PLC rack or a different module was
selected in the tree view.
Delete
Delete one or more modules. If a module was selected in the tree
view, this module is removed from the hardware configuration. If a
PLC rack was selected in the tree view, all the modules belonging to
this rack are removed. All modules are removed from the hardware
configuration if the
XUIO configuration
node was selected in the tree
view.
