Commissioning
52
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
Properties
Display the properties of the complete configuration or a module.
The properties of the complete configuration are displayed if the
XUIO
configuration
node was selected in the tree view. Here you can
specify which variables are to be generated for the digital inputs and
outputs and which entries should be added in the I/O configuration of
the PLC project.
No properties are available for PLC racks.
If a module was selected in the tree view, the properties of this
module are displayed. The slot, option and module addresses can be
changed here.
Fetch configuration
Fetch the current hardware configuration from the controller and
display in the tree view. This function can only be performed if a
connection to the controller can be established.
Send configuration
Transfer the hardware configuration displayed in the tree view to the
controller. This function can only be performed if a connection to the
controller can be established. The hardware configuration created is
stored on the Compact Flash memory of the controller. The previous
hardware configuration is overwritten by this. The controller must be
restarted for the transferred hardware configuration to become
effective.
Delete configuration
Delete the hardware configuration on the controller. This function can
only be performed if a connection to the controller can be established.
The hardware configuration saved on the Compact Flash memory of
the controller is deleted.
OK
Save the hardware configuration created, insert variables and I/O
configuration entries to the PLC project according to the hardware
configuration created and close the window.
Cancel
Close the window without changes to the PLC project and without
saving the hardware configuration created.
