Schiller CARDIOVIT AT-1, Service Handbook

Page: 26 / 84

26
Settings (cont.)
Defining Lead Sequence & Printout
The required settings can be selected as follows:
Sequences, Print & Auto-centering
Entry Key Sequence Definition Confirm
ALT 7
1 Standard Lead Sequence
Press STOP
key
2 Cabrera Lead Sequence
3 Simultaneous Print
4 Sequential Print
5 Auto-centering ON
6 Auto-centering OFF
7 Z-fold paper
Confirm the selection by pressing the STOP key
The selectable printout forms are:
Simultaneous
All ECG leads are printed in the same time segment (in
automatic mode only).
Sequential Each group is a contiguous time segment of approximately
2.5 or 5 seconds (in automatic mode only).
Auto-Centering ON All ECG traces are centred dynamically for optimal use of
paper width.
Auto-Centering OFF ECG traces are set to a fixed baseline position and may
possibly overlap.
The Standard and Cabrera lead groups available for the AT-1 / AT-1smartprint are:
Lead Groups
Standard Cabrera
I aVR V1 V4 aVL II V1 V4
II aVL V2 V5 I aVF V2 V5
III aVF V3 V6 -aVR III V3 V6