manualshive.com logo in svg

Schiller CARDIOVIT AT-1, Service Handbook

Share
Download
Schiller CARDIOVIT AT-1 Service Handbook Download Page 15

15

SCHILLER AT-1 / AT-1smartprint ECG Unit

SERVICE HANDBOOK  Issue b  June 2001

Art.No. 2.540022

AT-1/AT-1smartprint Short Form Operating Instructions

Automatic ECG Recording
with external printer connected and switched on:
Prepare skin, hook up patient.
Switch unit on, press ON

Press AUTO to record and print externally

with external printer NOT connected or switched
off:
To record and print on internal printer:
For AUTO Format 1 press

For Auto Format 2 press

 and then

Press COPY for additional copies.

Manual ECG Recording (internal printer only)
Prepare skin, hook up patient.

Switch unit on, press ON

Press MAN START

Change lead group with

Press STOP to stop the printout.

Electrode hook-up check

Press

 for print-out of

electrode dc offsets.
Best results are obtained when the electrode voltage
readings (right column) are b50mV and - 50mV.

Filter On/Off

Press

  to switch the (Myogram) filter On / Off

.

System Configuration

Press

  to print system

settings.

Summary of Contents for CARDIOVIT AT-1





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands