Schiller CARDIOVIT AT-1, Service Handbook

Page: 21 / 84

21
SCHILLER AT-1 / AT-1smartprint ECG Unit
SERVICE HANDBOOK Issue b June 2001
Art.No. 2.540022
Settings (cont.)
The defined formats and settings for your unit can be checked as follows:
ALT - 0 - 1 - any number
A printout of the defined settings will be produced and gives the following information,
depending on the installed software.
Unit designation Software version, Software option installed (C =
Interpretation) and interpretation version
Serial number Serial number of the unit
Leads Standard (S) or Cabrera (C)
ECG Format Long (ooo), Short (o) or Suppressed (-)
M ECG Average cycles as defined in auto ECG recording setup
(e.g. 4 * 3 (25 mm/s) + 2)
Measurements Enabled (+) or Suppressed (-)
Marks Enabled (+) or Suppressed (-)
Interpretation Enabled (+) or Suppressed (-)
Selected Rhythm leads Leads selected for R1 and R2
Automatic Centering Enabled (+) or Suppressed (-)
Paper type Z-folded
Printout of signals Sequential or Simultaneous
Baseline Filter 0.05, 0.15 or 0.30 Hz
Mains Filter 50, 60 Hz or OFF (-)
Myogram Filter 25 or 35 Hz, ON (+) or OFF (-)
Interpretation settings: N/A:+/- ‘normal/abnormal’ is written (+) or
suppressed (-)
U:+/- ‘unconfirmed report’ is written (+) or
suppressed (-)
A30:+/- patient age is assumed to be < 30 (-)
or >30 (+)
S: +/- low (-) or high (+) sensitivity