manualshive.com logo in svg

Schiller CARDIOVIT AT-1, Service Handbook

Share
Download
Schiller CARDIOVIT AT-1 Service Handbook Download Page 20

20

Settings

Each parameter is set by means of a code. This code comprises a combination of keys
starting with the ALT key followed by two or three numbers. The setting is confirmed with
the STOP key. As soon as the ALT key is pressed, the keyboard is dedicated to the
programming function.

Note:

The Alternative (ALT) function is only active for 4 seconds. If a programming
key is not pressed within 4 seconds, the unit reverts to standard mode. The
ALT key must again be pressed to activate the programming mode

The setting is remembered and the keyboard released for other functions when the
STOP key is pressed. Once a setting has been confirmed, it is stored in the memory
even when the unit is switched off.

Example
If you want to set the language on your ECG unit to English, the key sequence given in
the table (see page 23), is

ALT - 0 - 2 - 2 - STOP.

On the following pages the programmable parameters and the programming sequences
are described in detail.

Summary of Contents for CARDIOVIT AT-1





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands