www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
11 І 76
Technical Data
Air consumption
141 l/min
Operating pressure max. 6,3 bar
Square drive
1/2“ (12,7 mm)
Max. torque
310 Nm
Speed max.
7000 min
-1
Air supply
via maintenance unit with
filter pressure reducer and
oil atomiser
Required air quality
purified, condensationfree
and oil misted
Compressors
with min. 50 l tank volume
Sound volume level
L
WAd
105 dB(A)
Sound pressure
level L
pAd
94 dB(A)
K uncertainty
3 dB(A)
Safety information for air tools
Warning!
Basic safety measures must be followed
when using air tools to eliminate the risk of fire, elec-
tric shock and personal injury. Please be sure to read
and follow the notices in this operating manual prior to
the first use and store them in a safe place. The manu-
facturer assumes no liability for damages or personal
injury resulting from failure to follow these operating
instructions.
The hazards listed are foreseeable for general use of
handheld air impact drivers. However, the user must
also assess specific risks which may arise from its
use.
•
DANGER!
Keep your hands or other limbs out of
reach of rotating parts. Injuries may otherwise occur.
•
WARNING! CRUSHING HAZARD!
Keep hands
away from the counter bearing (e.g. box spanner)
during use. This particularly applies when removing
screws in tight work environments.
•
WARNiNG! RISK OF INJURY!
Disconnect the com-
pressed air before changing tools, adjustments and
maintenance.
•
WARNING! EXPLOSION HAZARD!
Never use pe-
trol or other flammable liquids to clean the air tool!
Sparks could ignite residual vapours inside the
compressed air tool resulting in explosion. Do not
use the tool in explosive environments with flamma-
ble liquids, gasses or dust. Never work on materials
which are or potentially could be highly flammable or
explosive.
•
In the cases of multiple hazards the safety instruc-
tions must be read and understood before attaching,
operating, repairing and exchanging accessories
and before working near the machine for screw
connections. Otherwise severe bodily injuries may
result.
•
The machine for screw connections should only be
set up, adjusted or used by qualified and trained
operators.
•
Never modify the machine for screw connections.
Modifications may reduce the effectiveness of safety
measures and increase operator risks.
•
Do not lose the safety instructions – hand them to
the operator.
•
Never use a damaged machine on screw connec-
tions.
•
Regularly maintain machines to verify all required
Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified,
Intended use
This air powered impact driver is suitable for loose-
ning and tightening screw connection during assem-
bly and repairs, and for loosening bolts when chan-
ging tyres. Only use the product as described and for
the specified applications. Keep these instructions in
a safe place. When passing this product on to others
please also include all documents. Any use not spe-
cified is prohibited and potentially dangerous. Dama-
ges resulting from noncompliance or misuse are not
covered by the warranty and are not included in the
manufacturer‘s liability. This device has been designed
for household use and may not be used for commer-
cial or industrial purposes.
Features
Verify contents are complete and the device is in per-
fect condition immediately after unpacking. Do not use
if the tool is defective.
1. Adjustable screw
2. Compressed air connection
3. Torque control
4. Trigger
5. Oil filling port
6. Pivot bolt (forward / reverse)
7. Square drive
The following parts are considered accessories:
8. Extension
9. Plug nipple
10. Machine oil
11. Lubricator
12. Allen key
13. Socket attachments
Summary of Contents for 7906100717
Page 70: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 70 І 76 ...
Page 72: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 72 І 76 ...
Page 73: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 73 І 76 ...
Page 74: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 74 І 76 ...
