50
2021-02-10 / V1.0
Maintenance
Contactors C195 Series – Installation and Maintenance Instructions
Removing/attaching the cover –
type C195 A/, B/, S/, T/, W/
Tools required
-
Set of Torx bits or Torx screwdriver set
-
Torque spanner
Disassembly
X
Unscrew the 2 screws (1) on the cover (7) of the
contactor.
X
Remove the cover (7) upwards from the contact
unit (2).
2
7
0.8-1 Nm
1
Fig. 63: C195 A/, C195 B/: Removing/attaching the cover
(the figure shows C195 A/, the procedure is identical
for C195 B/)
2
7
0.8-1 Nm
1
Fig. 64: C195 S/, C195 T/: Removing/attaching the cover
(the figure shows C195 S/, the procedure is identical
for C195 T/)
2
0.8-1 Nm
1
7
Fig. 65: C195 W/: Removing/attaching the cover
Assembly
X
Place the cover (7) on the contact unit (2).
X
Screw in the 2 screws (1) on the cover (7) of the con-
tactor and tighten them with a torque of 0.8-1 Nm.
