38
2021-02-10 / V1.0
Maintenance
Contactors C195 Series – Installation and Maintenance Instructions
Removing/attaching the cover –
type C195 X/
Requirements
-
The pole packs are disassembled, see section
“Disas-
sembling/assembling the pole packs – Typ C195 X/”
on page 35.
-
The pole plates are removed, see section
“Remov-
ing/inserting the pole plates – type C195 X/” on page
36.
-
The contact unit is disassembled, see section
“Disas-
sembling/assembling the contact unit – type C195
X/” on page 36.
Disassembly
X
Remove the cover (7) upwards from the contact
unit (2).
2
7
Fig. 45: C195 X/: Removing/attaching the cover
Assembly
X
Place the cover (7) on the contact unit (2).
Disassembling/assembling the
connecting plate – type C195 X/
Requirements
-
The pole packs are disassembled, see section
“Disas-
sembling/assembling the pole packs – Typ C195 X/”
on page 35.
-
The pole plates are removed, see section
“Remov-
ing/inserting the pole plates – type C195 X/” on page
36.
-
The contact unit is disassembled, see section
“Disas-
sembling/assembling the contact unit – type C195
X/” on page 36.
-
The cover is removed, see section
”Removing/attach-
ing the cover – type C195 X/” on page 38.
Disassembly
X
Remove the connecting plate (12) from the con-
tact unit (2).
12
2
Fig. 46: C195 X/: Removing the connecting plate
Assembly
X
For easier assembly, first remove the contact
bridge unit (5) from the contact unit (2). See sec-
tion
“Disassembling/assembling the contact
bridge unit – type C195 X/” on page 39.
X
Insert the connecting plate (12) into the cover (7).
X
Insert the contact bridge unit (5) into the cover (7).
-
Make sure that the sealing ring (13) and the con-
tact pressure spring (14) are in place and cor-
rectly positioned.
7
5
12
13
14
Fig. 47: C195 X/: Inserting the connecting plate and contact
bridge unit into cover
X
Grasp the auxiliary switch actuator (6) and hold it
firmly so that the position of the connection plate
(12) can no longer change.
