26
2021-02-10 / V1.0
Installation
Contactors C195 Series – Installation and Maintenance Instructions
6.3 x 0.8 mm
5
4
Fig. 26: C195 W/: Connecting the coil
Coil connections at latching contactor
variants
The latching contactor variants (type C195 A/ ...BD and
C195 S/ ...BD) have a hard-wired auxiliary switch, which
is required to switch over the board for the bistable
drive. This auxiliary switch is already connected to the
coil terminals A1 and A2 on delivery.
The remaining coil terminals A1, A2 and A3 (5) are avail-
able for customer use and must be connected if appli-
cable.
X
Plug the pre-assembled control wires with the re-
ceptacles (4) to the coil terminals A1, A2 and A3
(5).
X
If applicable bundle and secure the wires using
cable ties.
6.3 x 0.8 mm
5
4
Fig. 27: C195 A/ ...BD latching contactor: Connecting the coil
4
6.3 x 0.8 mm
5
Fig. 28: C195 S/ ...BD latching contactor: Connecting the coil
