4–2
TextBridge Professional Edition User's Guide
When you change any of the defaults, the new preferences become
the defaults until you change them again. TextBridge Pro
assumes that these are your preferred settings.
Two types of preferences are provided in TextBridge Pro—job
preferences and scanner preferences.
For your convenience, preferences appear on the preferences
panel (Figure 4–1) in the main window.
☞
Initially, only the four most commonly used controls are
displayed. Click the preferences view bar below the preference
pop-up menus, hold the mouse button down, and drag the bar
down to show all settings, one row at a time.
Scanner preferences
Job preferences
Figure 4–1. Expanded Preferences panel
Preferences are also available from the Recognize and Scanner
menus, as appropriate.
Note
You should change preferences before you begin a job. Only zone
templates and scanner settings can change during a job.
Refer to the next two subsections for information about job and
scanner preferences and how to use them.
