manualshive.com logo in svg

ScanSoft TextBridge PRO 8.5, User Manual, Page: 27 / 243

Share
Download
ScanSoft TextBridge PRO 8.5 User Manual Download Page 27

Installation

2–3

Basic scanner installation steps

The basic steps for installing a scanner are to:

1. Hook up the scanner to the SCSI port or USB port (for USB

Macintoshes) with the correct cable, and power up the scanner
and the Macintosh. Refer to your scanner documentation for
complete instructions.

2. Install the scanner driver on your Macintosh hard disk, as

directed by the scanner documentation.

3. Test the scanner using software tools provided by the

manufacturer.

☞

Make sure your scanner runs independently of TextBridge Pro.
After the scanner is functioning, install TextBridge Pro software.

I

NSTALLING 

T

EXT

B

RIDGE 

P

RO 

S

OFTWARE

After you have performed the scanner installation, and are sure
that it is functioning, you are ready to install TextBridge Pro
software. This section provides procedures to:

◆ 

run the software installation program

◆ 

select a scanner driver

Note

If you are not using TextBridge Pro with a supported scanner,
you can run the software installation program and ignore the
scanner selection instructions. For example, you might want to
use TextBridge Pro only to recognize image files produced by your
fax modem.

Summary of Contents for TextBridge PRO 8.5




















































































































































































































































Reviews:

No comments