SCAN 70 gas insert / ZC-fireplace, Instructions For Installation And Use Manual

Page: 1 / 64

SCAN 70 DIRECT VENT GAS
INSERT / ZC-FIREPLACE
INSTRUCTIONS FOR
INSTALLATION AND USE
T e s t e d &
L i st e d b y
B e a v e r t o n
O r e g o n U S A
O M N I - T e s t L a b o r a t o r ie s , I n c.
April 2005
KROG IVERSEN & CO. A/S 5492 VISSENBJERG DENMARK
SAVE THIS MANUAL FOR FUTURE REFERENCE.
-
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance
-
WHAT TO DO IF YOU SMELL GAS:
•
Shut off the gas supply.
•
Open windows; do not touch any electrical switches.
•
Do not try to light any appliance, extinguish any open flame.
•
Do not use the phone in your building.
•
Immediately call your gas supplier from a neighbor’s phone. Follow the gas
supplier's instructions.
•
If you cannot reach your gas supplier, phone the fire department.
-
Installation and service must be performed by a qualified installer, service
agency or the gas supplier.
This insert may be installed in an aftermarket permanently located manufactured
home (USA only) or mobile home where not prohibited by local codes.
This insert is only for use with the type of gas indicated on the rating plate. This insert
is not convertible for use with other gases unless a certified kit is used.
Registration no
.
WARNING:
If the information in these instructions is not followed exactly, fire or explosion may
result causing property damage, personal injury or loss of life