SawStop JSS-120A60, Owner'S Manual, Page: 78 / 100

You must install an 8” Dado blade,
Dado brake cartridge, and Dado blade
table insert in order to perform Dado
cuts .
Wobble Dado blade setups are NOT
compatible with the Jobsite Saw Pro .
Extra caution is needed when making
Dado cuts, since the blade guard,
riving knife, and anti-kickback pawls
cannot be used .
1
2
3
Use of a featherboard to hold the workpiece
down is recommended to help prevent
kickback.
For more detailed information on Dado setup
or cutting operation, visit the Woodworker’s
Guild of America website at: www.wwgoa.
com/article/make-better-dadoes-on-the-
table-saw/
i
i
Dado cuts are used to create a slot or trench
in the surface of the workpiece. A Dado is cut
perpendicular to the grain of the workpiece.
Adjust blade elevation to desired cut depth.
Move fence well away from the workpiece or
remove fence from the table.
Position workpiece flat on table and flush
against miter gauge.
Make sure workpiece
is not touching the blade .
Turn on motor.
Hold workpiece squarely and firmly against
miter gauge face and table. Push workpiece
slowly and smoothly toward and past blade.
DADO CUT
78
|
SawStop ® Jobsite Saw Pro