SawStop JSS-120A60, Owner'S Manual, Page: 41 / 100

Do not use the saw unless the table
is locked in one of the two positions:
either fully closed (not extended) or
fully open (fully extended) .
Always use the fence when making
rip cuts . Never perform a ripping
operation freehand-this may result in
serious injury .
4B
4A
3
4
2A
2B
2
Extend table for rip cuts wider than 12” (30
cm). Flip handle out to unlock the table.
Slide the table to the right (4A) to extend. Flip
handle towards the saw (4B) to lock table
in place. The rails for the table must be fully
extended to lock the handle.
To move the fence, push lever down to
unlock the fence (2A), and then slide fence
until the indicator line reads desired cut
width. Push down on the opposite end of the
lever (2B) to lock the fence in place.
SawStop ® Jobsite Saw Pro
|
41