SawStop JSS-120A60, Owner'S Manual, Page: 60 / 100

4
5
6
7
Extend and lock extension table.
Use a 4 mm hex key wrench to SLIGHTLY
loosen the two screws between front rail
and extension table. Push down or pull up
on extension table as necessary to correct
alignment.
Unlock, close, and re-lock extension table.
Recheck alignment. Make further
adjustments if necessary. Once alignment
is correct, check pencil mark made earlier,
or noted ruler measurement, to ensure
extension table is still aligned with rail. If
marks align, proceed to step 7. If marks do
not align, extension table has shifted side-to-
side relative to rail. Readjust extension table
to align marks. Use straightedge to recheck
vertical alignment, then recheck marks.
Once table top and extension table top are
aligned, and the marks are aligned, open
extension table and tighten screws.
60
|
SawStop ® Jobsite Saw Pro