25
06:Motor setting parameters
Set during running available * the values of different machine models are different.
Parame
ter
Parameter functions
Setting range
Factory
setting
06-00 Motor rated current setting
30
～
120%
100
06-01 Motor no load current setting
0
～
99%
40
06-02 Torque compensation increment
0
～
20%
0
06-03 Slip compensation increment
0
～
10.0
0
06-07
Automatic measurement of motor
parameters
0:No function
1:Auto measure(R1,R2,LC) motor stopping
2:Auto measure(R1,R2,LM,LC,LM, unload
current) motor running
0
06-08 Motor Pole-pairs
1~10
2
06-09 Motor R1(stator resistor)
0.00~30.00
Type
Setting
06-18 Motor Rated Slip ( vector control )
0.00~10.00Hz
2.00
06-19 Slip compensation limitation
0.00~10.00Hz
2.00
06-20 Torque compensation filtering time
0.0~2.0S
0
07:Protection Parameters
Set during running available * the values of different machine models are different.
Parame
ter
Parameter functions
Setting range
Factory
setting
07-00
Over voltage stall prevention function
setting
0:Unavailable
1:Available
1
07-01
Over current stall prevention level
setting in acceleration
50
～
200%
160
07-02
Over current stall prevention level
setting during running
50
～
200%
160
07-03 Electrical thermal relay selection
0:Act in standard motor
1:Act in special motor
2:No action
2
07-04 Thermal relay action time selection
30
～
300 Sec
60
07-05 Over-torque detection function option
0:No detection
1:Over torque detection (oL2) during
constant speed running, stop running after
detection
2:Over torque detection (oL2) during
constant speed running, continue to run
after detection
3:Detect over-torque when motor running ,
after detected over-load,(oL2)it could stop.
4:Detect torque when motor running , after
detected over-torque,(oL2)it could run
continuously.
0
07-06 Over torque detection level
30
～
200%
150
07-07 Over torque detection time
0.1
～
10.0 Sec
0.1
07-08 Unusual restart times
0
～
2
0
